Links
Date:2011-08-05 5:20:41
The price of imported bearing general are very high, bearing the most vulnerable parts of the wear is ball, if the ball bearing damaged the whole bearing will be to change, its really bad. Below we introduce a coincidence in ball bearings method:
1. First we will damage of bearing outer ring flat on pressure machine work on the stage, and open to the press gently a pressure. Will the damage of the ball out.
2. And then put into the ball with the hand will all crowded in the outer ring of steel ball on one side and put on inner circle, and make steel ball as much as possible into the groove. This step is important operation, a should pay attention to.
3. We watch when the inner circle and cant enter into the normal position, but tilt, at this moment we should open press gently a pressure, inner circle is forced in.
4. And then with the hand will divide the steel ball and loads keep frame, the need to keep frame is riveted with rivets, on the machine pressure riveting. At this time, we have to be careful operation, because of the pressure into the process, inside and outside circle have a small amount of elastic deformation, but will not damage inside and outside circle and ball.
5. Bearing installed to precision inspection, gently do some necessary orthopedics.